FL-0150
FLEC Carpet Test Plate, 10 mm
Test plate for positioning carpet samples up to 10 mm thick beneath the FLEC Cell.
View product
Sample preparation
FL-0100
FLEC Recovery Measurement Test Kit
The FL-0100 kit supports recovery measurements under defined conditions of airflow, humidity, temperature and pressure. It consists of an insulated glass plate with an opening for a small vial. A known compound is added to the vial and weighed before and after exposure beneath the FLEC Cell. The measured evaporation rate can then be compared with the amount collected on the sampling tube or tubes.
Technical guidance included
Worldwide delivery available
Manufactured by CHEMATEC
Technical overview
| Product code | FL-0100 |
|---|---|
| Components | Insulated glass plate with an opening for a small vial |
| Method | Weigh the reference compound before and after exposure |
| Comparison | Evaporation rate against the amount collected on sampling tubes |
| Test conditions | Defined airflow, humidity, temperature and pressure |
Select airflow and sampling conditions according to the applicable method and your material. Contact CHEMATEC for configuration guidance.
Continue exploring
Related products
FL-0151
FLEC Test Plate Adapters, 5 pcs
Five 1 mm adapters for adjusting carpet-sample height in FL-0150 and FL-0152 test plates.
View productFL-0152
FLEC Carpet Test Plate, 25 mm
Test plate for positioning carpet samples up to 25 mm thick beneath the FLEC Cell.
View product