The FLEC® has been validated and used in research for many years.
Below is a publication list of journal articles, abstracts, poster or oral presentations where the FLEC or CHEMATEC’s other products have been in focus.
If you have anything that can be added to the list, we encourage you to contact CHEMATEC.
2022 |
Wang, Haimei; Xiong, Jianyin; Wei, Wenjuan In: Environment International, vol. 168, pp. 107451, 2022, ISSN: 0160-4120. Abstract | Links | BibTeX | Tags: Indoor and vehicular air quality (IVAQ), Measurement, Pre-assessment, Semi-volatile organic compounds (SVOCs), temperature, Volatile organic compounds (VOCs) @article{Wang2022,The emissions of volatile organic compounds (VOCs) and semi-volatile organic compounds (SVOCs) from indoor building and vehicle cabin materials can adversely affect human health. Many mechanistic models to predict the VOC/SVOC emission characteristics have been proposed. Nowadays, the main obstacle to accurate model prediction is the availability and reliability of the physical parameters used in the model, such as the initial emittable concentration, the diffusion coefficient, the partition coefficient, and the gas-phase SVOC concentration adjacent to the material surface. The purpose of this work is to review the existing methods for measuring the key parameters of VOCs/SVOCs from materials in both indoor and vehicular environments. The pros and cons of these methods are analyzed, and the available datasets found in the literature are summarized. Some methods can determine one single key parameter, while other methods can determine two or three key parameters simultaneously. The impacts of multiple factors (temperature, relative humidity, loading ratio, and air change rate) on VOC/SVOC emission behaviors are discussed. The existing measurement methods span very large spatial and time scales: the spatial scale varies from micro to macro dimensions; and the time scale in chamber tests varies from several hours to one month for VOCs, and may even span years for SVOCs. Based on the key parameters, a pre-assessment approach for indoor and vehicular air quality is introduced in this review. The approach uses the key parameters for different material combinations to pre-assess the VOC/SVOC concentrations or human exposure levels during the design stage of buildings or vehicles, which can assist designers to select appropriate materials and achieve effective source control. |
2016 |
Xiong, Jianyin; Cao, Jianping; Zhang, Yinping Early stage C-history method: Rapid and accurate determination of the key SVOC emission or sorption parameters of indoor materials Journal Article In: Building and Environment, vol. 95, pp. 314 - 321, 2016, ISSN: 0360-1323. Abstract | Links | BibTeX | Tags: Emission, Indoor air quality, Key parameters, Semi-volatile organic compounds (SVOCs), Sorption @article{XIONG2016314,The accurate and rapid determination of the emission parameters of semi-volatile organic compounds (SVOCs) from indoor materials is of great importance for estimating and controlling indoor exposure. By virtue of a simplified mass transfer model we derived, a new method called the early stage C-history method, has been developed to measure the key emission parameters: the gas phase SVOC concentration adjacent to the material surface (y0) and the convective mass transfer coefficient (hm). We validate this model using experimental data found in the literature. When compared with established methods, the new method has the following salient features: (1) rapid (the experimental time is reduced from several months to several days); (2) accurate (R2 in the range of 0.92–0.97). Further analysis shows that both features can be further improved if the test system has a smaller chamber wall/air partition coefficient. The new method is also extended to measure the key parameters of SVOCs from sorption materials. This method should prove useful for screening SVOC emission characteristics and for assessing exposure, as well as for chamber and test design. |